378 results found.
Year: 2016, Volume: 16, Number: 4
... . Mitsantisuk, "FPGA- rendered by the practical implementation of a custom Based High-Performance Force Control System With Friction-Free interrupt management scheduler, based on the nMPRA and Noise-Free Force Observation," IEEE Trans. Ind. Electron., vol. architecture. Tests conducted and presented in section III 61, no. 2, ...
Terms matched: 1 - Score: 3 - 1,395k
Year: 2018, Volume: 18, Number: 4
... to the first right sideband of 122.178 Hz. It expected to be close to the 100 Hz frequency component on can be noted that these components are in the noise level, EPVA signature. From Fig. 7, the components magnitudes indicating that there is no gear problem in the setup. were 0.315% for baseline ...
Terms matched: 1 - Score: 3 - 1,921k
Year: 2017, Volume: 17, Number: 1
... [29] N. Celebi, "An accurate single CAD model based on radial basis [8] M. Yucel, Z. Aslan, "The noise figure and gain improvement of function network", Optoelectron. Adv. Mater. €“ Rapid Commun., vol. double-pass C- band EDFA", ...
Terms matched: 1 - Score: 3 - 1,216k
Year: 2017, Volume: 17, Number: 1
... performance applications of AC motors [2]. It has this period, the system response is sensitive to parameters made AC motors possess torque-generating capability like variation, noise, and the tracking error cannot be controlled DC ones by decoupling the torque and flux control variables directly. Thus, it is essential to abbreviate the period ...
Terms matched: 1 - Score: 3 - 1,332k
Year: 2017, Volume: 17, Number: 2
... obtain and III. The single note signals in RWC are recorded at optimum parameters, the execution time is comparable. laboratory. So, there is not any noise or background signals in the test samples which are made by summation of single VI. CONCLUSION note signals and consequently, separation process for those In this paper ...
Terms matched: 1 - Score: 3 - 1,709k
Year: 2017, Volume: 17, Number: 2
... the whole system is optimized to require only electromagnetic waves generated by other electronic few resources. The microcontroller is used from the devices; in most cases, the noise from the electrical low-power family, so the total current consumption will network and the harmonics of this disturbing signal are be approx. 43mA (having activated the ...
Terms matched: 1 - Score: 3 - 2,915k
Year: 2018, Volume: 18, Number: 3
... the objectives of a steganography algorithm. Expectations image using LSB. They used 4 cover images for test regarding steganography on images have been determined as regarding to Peak Signal-to-Noise Ratio (PSNR) and in Table I by Hussain and Hussain [17]. embedding capacity values. They claimed that their algorithm achieved a high embedding ...
Terms matched: 1 - Score: 3 - 1,261k
Year: 2017, Volume: 17, Number: 3
... ," International Journal of Advanced Computer Science and High-Performance Force Control System With Friction-Free and Applications €“ IJACSA, vol. 6, no. 4, 2015. Noise-Free Force Observation," IEEE Trans. Ind. Electron., vol. 61, doi:10.14569/IJACSA.2015.060406. no. 2, pp. 994 ...
Terms matched: 1 - Score: 3 - 1,638k
Year: 2017, Volume: 17, Number: 3
... fault incident impulse by eqn. (4) in order to reduce the impact of types. So, in the first stage, four groups are identified by noise as well as to surmount amplitude attenuation. SVM1 whereas in the second stage the first three groups are It is worth noting that, for each of the ...
Terms matched: 1 - Score: 3 - 1,291k
Year: 2017, Volume: 17, Number: 4
... some threshold X n ›k, l € Bn ›k, l € Tn( x) (4) Tsize are discarded as false positives to eliminate noise in the image. For all remaining candidate regions, a line segment where X n ›k, l represents an intensity of a pixel in nth with ...
Terms matched: 1 - Score: 3 - 1,560k