378 results found.
Year: 2016, Volume: 16, Number: 2
... as graphs of Block Error Rate (BER) against (Eb/No) where (Eb/No) is the ratio of energy per information symbol to noise spectral density. Simulations were carried out using the AWGN channel with the SPA as decoding algorithm. For a (504,252) LDPC code, our ...
Terms matched: 1 - Score: 3 - 1,697k
Year: 2016, Volume: 16, Number: 2
... F. Wang, "Phase Locked Loop L1= (e+ 2e -ac wT ah- 1- 1.998a+ 2aK p g) (34) g Noise Reduction via Phase Detector Implementation for Single Phase Systems", IEEE Transactions on Industrial Electronics, vol. 58, no. 6, 1 L2= ( ...
Terms matched: 1 - Score: 3 - 1,790k
Year: 2019, Volume: 19, Number: 1
... . combination of irradiance and temperature values with the One must note that this method is prone to low frequency corresponding set point (MPP) is used to establish noise once the MPP is achieved. Such oscillations can be approximation functions or correlations, such as those caused by two factors as follows. The voltage and current ...
Terms matched: 1 - Score: 3 - 1,518k
Year: 2016, Volume: 16, Number: 2
... , b0. 3 – the model parameters (parameters of A and B voltage at the induction generator terminals. The plant is polynomials). disturbed by a stochastic noise with variance σ2=0.01, to Related to the process, when we refer the process ensure the excitation of a recursive least square (RLS) parameters ...
Terms matched: 1 - Score: 3 - 1,330k
Year: 2019, Volume: 19, Number: 1
... and most powerful shape descriptor. It is a region- distance metrics along with multiclass classifier. based method according to [7]. It is insensitive to noise (holes) and somewhat sensitive to occlusion and II. MATERIALS AND METHODS deformation [8]. From the previous researches it is studied that Zernike Moments ...
Terms matched: 1 - Score: 3 - 1,329k
Year: 2016, Volume: 16, Number: 2
... does the percentage of retries. This action is suitable. If for 5 packet-load/sensor the success rate on the normal because the wireless medium is susceptible to noise, simulation is acceptable (92%), at 20 packet-load/sensor the errors and collisions. When the speed increases, the window success rate drops ...
Terms matched: 1 - Score: 3 - 1,298k
Year: 2016, Volume: 16, Number: 3
... operating practically implemented by a universal current conveyor in the current-mode are that these circuits can provide (UCC) [25] which was developed at Brno University greater signal-to-noise ratio and dynamic range, lower of Technology. Implementation of the MO-CF using the power consumption and wider frequency bandwidth UCC is shown in Fig. 1. ...
Terms matched: 1 - Score: 3 - 1,290k
Year: 2018, Volume: 18, Number: 4
... . Kriegel, J. Sander, X. Xu, "A density-based algorithm 2007. doi:10.1145/1255175.1255177 for discovering clusters in large spatial databases with noise," KDD, [9] N. Elmqvist, J. D. Fekete, "Hierarchical aggregation for information vol. 96, no. 34, ...
Terms matched: 1 - Score: 3 - 3,595k
Year: 2016, Volume: 16, Number: 4
... variations on the detection performance. parameters that need to be optimized in this classifier are C, To select the best normalization method to be used in the a noise parameter and γ from the RBF kernel. The optimum proposed method, several experiments have been conducted values of these parameters are obtained by exhaustive search using different ...
Terms matched: 1 - Score: 3 - 1,941k
Year: 2019, Volume: 19, Number: 4
... (Detent- Forcep-p= 6.24N), when compared with dual mover topology. These reduced peaks results in reduced Detent- Forcep-p, vibrations, and corresponding acoustic noise. Detent force is a no-load parameter (when only DC Figure 5. Thrust force comparison excitation is applied) and results in thrust force ripples when 13 ...
Terms matched: 1 - Score: 3 - 798k